Xerox Phaser 6180MFP/N is a multifunction printer, Phaser 6180MFP is available in two types: 6180MFP/N, which I test, and 6180MFP/D, which add duplexer (for printing on both sides of the page). In both versions, 6180MFP can print, scan and fax over the network and work as a standalone copier, fax machine and e-mail sender, complete with a 50-page automatic document feeder (ADF) for multipage documents. The standard paper capacity is 400 sheets, divided into 250 sheet drawers and 150 sheet trays, which gives you the flexibility to store two different types of paper at all times. This should be enough for most small offices and working groups.
Phaser 6180MFP/N actually gives when printing. Xerox rated the engine at 31 pages per minute for monochrome and 20 ppm for colour-which is actually slightly faster for colour than the single 6180 / N function. A faster rating means faster real-world speeds. Setup for 6180MFP is a mixed bag. To start with, this is a big and heavy printer. It measures 28.7 x 18.1 x 22.4 inches (HWD) - very large to fit comfortably on the table. It weighs 88.2 pounds, which makes moving or lifting it takes two people. Once the printer is installed, the setup is pretty typical for the colour laser; Remove the packing material, install the toner and paper cartridge, attach the cord, and run the installation routine. I installed the printer on a system running Windows XP. According to Xerox, this device also comes with full software and drivers for Windows 2000, 2003 Server, and Vista, as well as for Mac OS 10.2 or later. In addition, you can download a printer driver for Windows, Linux and Mac Os on the links below. [Source: PCMag]
Xerox Phaser 6180MFP Driver Supports for Os:
Android / Mobile
Windows 10
Windows 8
Windows 7
Windows XP
Windows Vista
Mac Os X
Linux
0 komentar:
Post a Comment